Wago I/O System 750-841 W/ 750-408 / 2 x 750-504 / 2 x 750-650/003-000 / 750-600

The couplers and controllers of the modular I/O System 750 receive digital and analog signals from the I/O modules and sensors and transmit them to the actuators or higher level control systems.

 Using the WAGO controllers, the signals can also be (pre-)processed. The device is designed for IP20 protection class.

It is protected against finger touch and solid impurities up to 12.5mm diameter, but not against water penetration.

Unless otherwise specified, the device must not be operated in wet and dusty environments.

Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG

Fine-stranded conductor :- 0.08 … 2.5 mm² / 28 … 14 AWG

Strip length :- 8 … 9 mm / 0.31 … 0.35 inches

Operating temperature :- 0 °C ... 55 °C, -20 °C … +60 °C for components with extended temperature range

Storage temperature :- -40 … +85 °C

Relative humidity :- 5 % to 95 % without condensation

Baud rate :- 1.2 kBd … 57.6 kBd (9600 baud (default setting)

Data width :- 1 x 24-bit input/output (3-byte user data); 1 x 40-bit input/output (5-byte user data); 1 x 8-bit control/status

Number of data bits :- 7/8, adjustable

Number of stop bits :- 1/2, adjustable

Buffer :- 120-byte input / 16-byte output

Supply voltage (system) :- 5 VDC; via data contacts

Current consumption (5 V system supply) :- 55 mA

Isolation :- 500 V system/field

Mounting type :- DIN-35 rail

Operating altitude :- 0 … 2000 m / 0 … 6562 ft

Mounting position :- horizontal (standing/lying); vertical