Wago 750-602 24V DC Power Supply

This supply module provides the I/O modules with the corresponding supply potential.

The maximum current provided by the supply module is 10 A. When configuring the system, the total current must not be exceeded.

Should higher currents be necessary, an intermediate supply module must be added to the assembly

Signal type (voltage) :- 24 VDC

Supply voltage (system) :- 5 VDC; via data contacts

Supply voltage (field) :- 24 VDC (-25 … +30 %); Via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact)

Solid conductor :- 0.08 … 2.5 mm² / 28 … 14 AWG

Fine-stranded conductor :- 0.08 … 2.5 mm² / 28 … 14 AWG

Strip length :- 8 … 9 mm / 0.31 … 0.35 inches

Mounting type :- DIN-35 rail

Ambient temperature (operation) :- 0 … +55 °C

Ambient temperature (storage) :- -25 … +85 °C

Operating altitude :- 0 … 2000 m / 0 … 6562 ft

Mounting position :- horizontal (standing/lying); vertical

Protection type :- IP20

Current carrying capacity (power jumper contacts) :- 10A

Number of outgoing power jumper contacts :- 3