Wago 750-343 Profibus + Wago 750-602 + 3 x 750-431 + 750-530 + 750-600 Set

The ECO fieldbus coupler is designed for applications with a reduced scale I/O requirement. Using digital only process data or small amounts of analogs, while retaining all of the choice that’s offered by the Series 750 I/O.

When initializing, the buscoupler determines the module structure of the node, to create the process image in PROFIBUS. In order to optimize addresses, the I/O modules with a bit width smaller than 8 are grouped in one byte.

No. of couplers connected to Master :- 125 with repeater

Max. no. of I/O points :- approx. 6000 (depends on master)

Max. length of fieldbus segment :- 100 m ... 1200 m (depends on baud rate/cable)

Baud rate :- 9.6 Kbaud ... 12 Mbaud

Transmission time:-  typ. 1 ms (10 couplers; 32 digital I/Os per coupler at 12 Mbaud) max. 3.3 ms

Number of I/O modules :- 63

Max. input process image :- 32 bytes

 Max. output process image:- 32 bytes

Power supply :- 24 VDC (-25 % ... +30 %)

Input current typ. at rated load (24 V) :- 260 mA

Internal current consumption (5 V) :- 350 mA

 Total current for I/O modules (5 V) :- 650 mA

Operating temperature :- 0 °C ... +55 °C

Cross sections :- 0.08 mm² ... 1.5 mm² / AWG 28 ... 16

Strip lengths:- 5 ... 6 mm / 0.22 in

Storage temperature :- -25 °C ... +85 °C

 Relative air humidity (no condensation) :- 95 %

Supply voltage (system) :- 24 VDC (-25 … +30 %); via pluggable connector

Solid conductor :- 0.08 … 1.5 mm² / 28 … 16 AWG

Fine-stranded conductor :- 0.08 … 1.5 mm² / 28 … 16 AWG

Strip length :- 5 … 6 mm / 0.2 … 0.24 inches

Mounting type :- DIN – 35 Rail