Siemens S7200 PLC Set of 6ES7 214-1BC01-0XB0 + 235-0KD00-0XA0 + 223-1PH00-0XA0

·        6ES7 214-1BC01-0XB0 :- 

·        Siemens 6ES7 214-1BC01-0XB0 SIMATIC S7-200 CPU 214 Compact Controller AC/DC/Relay, with 1 x RS-485 Interfaces (MPI/PPI/Freeport), 4 Kbytes User Program Memory and 4 Kbytes Data Memory (2K Words Program / 2K Words Data), (14) 24V DC Digital Inputs, Sink, (10) Relay Contact Digital Outputs, 2A/each, (2) Analog Adjustment Potentiometers, (1) 2kHz High Speed Counter, (2) 7kHz High Speed Counters, Integrated 85-264V AC Power Supply, expandable with expansion modules

·        Digital I/O Supported :- 64 Inputs/ 64 Outputs

·        Analog I/O Supported :- 16 Inputs/16 Outputs

·        Optical Isolation :- 500 VAC, 1 min.

·        ON State Nominal :- 24 VDC, 7 mA

·        OFF State Maximum :- 5 VDC, 1 mA

·        Output Type :- Relay, Dry Contact

·        Output  Point Voltage Range :- 5 to 30 VDV/250 VAC

·        Output  Point Maximum Load Current :- 2 A/Points, 8 A/Common

·        Output  Point OverCurrent Surge :- 7 A with Contacts Closed

·        Output  Point Isolation Resistance :- 100 MΩ Minimum

·        Output  Point Contact Resistance :- 200 mΩ maximum

·        Output  Point Isolation Coil to Contact :- 1500 VAC, 1 min

·        Output  Point Isolation Contact to Contact :- 750 VAC, 1 min

·        Output  Point Voltage/ Frequency Range :- 85 to 264 VAC at 47 to 63 Hz

·        Input Current :- 4.5 VA Typical, CPU only 50 VA max. Load

·        Input Current  Voltage Range :- 20.4 to 28.8 VDC

·       6ES7 235-0KD00-0XA0 :-

·        Siemens 6ES7 235-0KD00-0XA0 SIMATIC S7-200 EM 235 Analog Current/Voltage Input/Output Combination Module for S7-21x CPUs only, (3) Analog Inputs 0.5-2V, 0-5V, 0-10V, (1) Analog Output +/-10V, 0-20 mA, 12-Bit Resolution

·        from backplane bus 5 V DC, max.:-  30 mA

·        from sensor current supply or external current supply (24 V DC), max.:-  60 mA

·        Number of analog inputs:-  4; Difference

·        Load impedance (in rated range of output) with voltage outputs, min.:-  5 kΩ

·        Load impedance (in rated range of output) with current outputs, max.:-  0.5 kΩ

·        Basic conversion time (ms) :- < 0.25 ms

·        Settling time for voltage output :- 100 µs

·        Settling time for current output :-  2 ms

·        Displayable conversion value range bipolar signals:-  -32 000 to +32 000

·        Displayable conversion value range unipolar signals:-  0 to 32 000

·        Common mode voltage, max.:-  12 V

·       6ES7 223-1PH00-0XA0 :-

·        SIMATIC S7-200, Digital I/O EM 223, only for S7-22X CPU, 8 DI 24 V DC, Sink/Source, 8 DO relay, 2 A/channel

·        Power Dissipation :- 2.5 W

·        Output Type :- Relay, dry contact

·        Out put Points Voltage Range :- 5 to 300 VDC/250 VAC

·        Out put Points Maximum Load Current :- 2 A /Point, 8 A/Common

·        Out put Points Isolation Resistance :- 100 MΩ max.

·        Out put Points Switching Delay :- 10 ms max.

·        Out put Points Contact Resistance :- 200 mΩ max.

·        Out put Points Isolation Coil to Contact :- 1500 VAC, 1 min

·        Out put Points Isolation Contact to Contact :- 750 VAC, 1 min.

·        Input Points ON State Range :- 15 to 30 VDC, 4 mA min.

·        Input Points ON State Nominal :- 24 VDC, 7 mA

·        Input Points OFF State Max. :- 5 VDC, 1 mA

·        Input Points Response Time :- 4.0 ms maximum

·        Input Points Optical Isolation :- 500 VAC, 1 min

·        Current 5 VDC Logic :- 100 mA From Base unit

·        Output Point Current :- Supplied by user at module common