s
Supplier Of Industrial and Marine Equipments
· Siemens 6AT8000-1BB00-4XA0 siplus cms - hardware
ifn vib-a acquisition of analog signals; detection of machine
vibrations 6*iepe-input for vibration acceleration measurement;
ub=24vdc; ip67 measurement; ub=24vdc; ip67
· Product type designation :- IFN VIB-ACC
· Product description :- six IEPE sensor signals or five IEPE
sensor signals and one analog input signal (e.g. for speed) are
measured with the IFN VIB-A
· Mounting type :- standard rail
· Mounting accessories :- Mounting bracket, can be ordered as option
· Required clearance for side-by-side mounting at the front :- 80 mm Required clearance for side-by-side mounting at the top:- 25 mm
· Required clearance for side-by-side mounting at the back :- 25 mm
· Design of the power supply :- stabilized
· Rated value (DC) :- 24 V
· permissible range, lower limit (DC) :- 19.2 V
· permissible range, upper limit (DC) :- 32 V
· Active power input, max.:- 4.8 W
· Overvoltage strength, min.:- -60 V
· Overvoltage strength, max.:- 60 V
· Input ranges (rated values), voltages At DC, min.:- -30 V
· Input ranges (rated values), voltages At DC, max.:- 30 V
· Input ranges (rated values), currents with DC :- 0.012 mA
· Electrical input frequency, min. :- 0.1 Hz
· Electrical input frequency, max.:- 40 kHz
· Number of interfaces :- 3
· Transmission rate, max.:- 400 Mbit/s
· Design of plug-in connection :- Connector plug 8-pole (M12)
· Ambient temperature during operation min.:- -40 °C
· Ambient temperature during operation max.:- 65 °C
· Ambient temperature during Storage, min.:- -40 °C
· Ambient temperature during Storage, max.:- 85 °C
· Ambient temperature during Transportation, min.:- -40 °C
· Ambient temperature during Transportation, max.:- 85 °C
· Material of housing :- aluminum
· Siemens 6AT8000-1BB00-4XA0 siplus cms - hardware
ifn vib-a acquisition of analog signals; detection of machine
vibrations 6*iepe-input for vibration acceleration measurement;
ub=24vdc; ip67 measurement; ub=24vdc; ip67
· Product type designation :- IFN VIB-ACC
· Product description :- six IEPE sensor signals or five IEPE
sensor signals and one analog input signal (e.g. for speed) are
measured with the IFN VIB-A
· Mounting type :- standard rail
· Mounting accessories :- Mounting bracket, can be ordered as option
· Required clearance for side-by-side mounting at the front :- 80 mm Required clearance for side-by-side mounting at the top:- 25 mm
· Required clearance for side-by-side mounting at the back :- 25 mm
· Design of the power supply :- stabilized
· Rated value (DC) :- 24 V
· permissible range, lower limit (DC) :- 19.2 V
· permissible range, upper limit (DC) :- 32 V
· Active power input, max.:- 4.8 W
· Overvoltage strength, min.:- -60 V
· Overvoltage strength, max.:- 60 V
· Input ranges (rated values), voltages At DC, min.:- -30 V
· Input ranges (rated values), voltages At DC, max.:- 30 V
· Input ranges (rated values), currents with DC :- 0.012 mA
· Electrical input frequency, min. :- 0.1 Hz
· Electrical input frequency, max.:- 40 kHz
· Number of interfaces :- 3
· Transmission rate, max.:- 400 Mbit/s
· Design of plug-in connection :- Connector plug 8-pole (M12)
· Ambient temperature during operation min.:- -40 °C
· Ambient temperature during operation max.:- 65 °C
· Ambient temperature during Storage, min.:- -40 °C
· Ambient temperature during Storage, max.:- 85 °C
· Ambient temperature during Transportation, min.:- -40 °C
· Ambient temperature during Transportation, max.:- 85 °C
· Material of housing :- aluminum