Rosemount PT100 50 to 450 dg C 0065C21T0135D0125T46A1Q8 Temperature Sensors

The 214C RTD uses the industry-standard PT100 sensor type.

 It is available using a thin film element, better in vibration and physical shock, or a wire wound element for a wider temperature range and better for low-temperature applications.

Numerous calibration ranges which include multiple points and Callendar-Van Dusen constants, allow for unmatched accuracy.

Specifications are defined by measurements collected per methods defined in IEC 60751:2008. Effects of temperature cycling for the 214C RTD are ±0.15°C (0.059Ω) maximum ice-point resistance shift following 10 cycles over the maximum specified temperature range. The hysteresis is ±0.50 °C (0.185 ) maximum ice-point resistance shift over the maximum specified temperature range.

Rosemount 214C temperature sensors are available with immersion lengths from 2 to 78-1/2 inches (50 to 2000mm) in 1/4-inch (5mm) increments.

All sensor styles and lengths have a standard 1/4-inch (6mm) nominal diameter.

Multiple options for connection heads, accuracy, mounting styles, extensions and other factors are also available.

The Rosemount 214C Sensors are designed to provide flexible and reliable temperature measurements in process monitoring and control environments. Features include: Temperature ranges of –321 to 1112 °F (–196 to 600 °C) for RTDs and –321 to 2192 °F (–196 to 1200 °C) for thermocouples

Industry-standard sensor types: PT100 RTDs; thermocouple Type J, Type K, and Type T

 Spring-loaded and compact spring-loaded sensor mounting styles

 Hazardous location product approvals and certification

 Calibration services to give insight to sensor performance

 Calibration certificate to accompany sensor

Connection Head :- Rosemount Aluminum – IP Rating 66/68 –

Conduit / Cable Entry 1/2-in. NPT

Sensor lead wire termination :- Terminal block (DIN 43762)

Sensor type :- RTD, dual element, 3-wire

Temperature range :- - 50 to 450 °C (- 58 to 842 °F)

Extension length (N) in millimeters :- 35 mm

Sensor length (L) in millimeters :- 100mm

IECEx Flameproof Approval

Sensor calibration:- from - 50 to 450 °C (-58 to 842 °F) with A, B, C, and Callendar-Van Dusen constants