Phoenix Contact PLC-BSP-24DC/21 Ord.No. 2967219 Wh 2961105

6.2 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V DC

Compatible components :- Miniature relay, REL-MR-24DC/21AU, REL-MR-24DC/21; Miniature optocoupler, OPT-24DC/24DC/2, OPT-24DC/24DC/100, OPT-24DC/230AC/1

Protective circuit :- Damping diode, polarity protection diode

Nominal input voltage UN :- 24V DC

Connection method :- Spring-cage connection

Stripping length :- 8 mm

Conductor cross section rigid :- 0.14 mm² ... 2.5 mm²

Conductor cross section AWG :- 26…14

Ambient temperature (operation) :- -40 °C ... 60 °C

Ambient temperature (storage/transport) :- -40 °C ... 85 °C

Mounting type :- DIN rail mounting

Plug-in miniature power relay, with power contact, 1 changeover contact, input voltage 24 V DC

Mechanical service life :- 2x 10⁷ cycles

Product type :- Single relay

Test voltage (Winding/contact) :- 4 kV AC (50 Hz, 1 min., winding/contact)

Nominal input voltage UN :- 24 V DC

Input voltage range :- 14.4 V DC ... 66 V DC

Coil resistance :- 3390 Ω ±10 % (at 20 °C)

Typical input current at UN :- 7 mA

Typical release time :- 2.5 ms

Maximum switching voltage :- 250 V AC/DC

Minimum switching voltage :- 5 V (at 100 mA)

Limiting continuous current :- 6A

Ambient temperature (operation) :- -40 °C ... 85 °C

Ambient temperature (storage/transport) :- -40 °C ... 85 °C