Phoenix Contact MINI MCR-SL-R-UI Transducer Ord. No. 2864095

The 6.2 mm wide MINI MCR-SL-R-UI... potiposition transducer converts potentiometer positions as a percentage of an standard analog signal. If the potentiometer range cannot be utilized to the full, an externally accessible slide switch is used to set the upper and lower potiposition end values. The output signal between 0 and 100% is based on this fixed end value.

Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

MCR potiposition transducer for conversion of potentiometer positions into a standard analog signal, 0 Ω input... 100 Ω to 0 kΩ ... 100 kΩ

Potentiometer resistance range :- 100 Ω ... 100 kΩ

 Reference voltage source :- < 3.6 V

Max. voltage output signal :- 12.5 V

Non-load voltage :-  Approx. 12.5 V

Max. current output signal :- 23 mA

Ripple :-  < 20 mVPP (at 500 Ω)

Load/output load current output :- < 500 Ω (20 mA) .

Behavior in the event of a sensor error :- Configurable 0 % ... 105 %

Supply voltage range :- 19.2 V DC ... 30 V DC (to bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715)

Typical current consumption :-  < 25 mA (at 24 V DC)

Power consumption :- < 500 mW

Ambient temperature (operation) :- -20 °C ... 65 °C

Ambient temperature (storage/transport) :-  -40 °C ... 85 °C

Conductor cross section, solid Screw connection :-  0.14 mm² ... 2.5 mm²

Conductor cross section, solid Spring-cage conn. :- 0.2 mm² ... 2.5 mm²

 Conductor cross section, stranded Screw connection :- 0.2 mm² ... 2.5 mm²

Conductor cross section, stranded Spring-cage conn.:-  0.2 mm² ... 2.5 mm²

Stripping length Screw connection :- 12 mm

Stripping length Spring-cage conn. :- 8 mm