Phoenix Contact MACX MCR-EX-SL-SD-24-48-LP Solenoid Driver

Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 48 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Screw connection.

Electrical isolation :- 2-way isolation

Test voltage :- 2.5 kV AC (50 Hz, 60 s)

Rated insulation voltage :- 375 V_PP

Power dissipation :- < 1.41 W

Voltage input signal :- 19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)

Max. current input signal :- 85 mA (U_e = 24 V DC)

Output voltage :- 10.5 V DC (48 mA)

Output resistor :- 275.7 Ω (Internal resistance R_i)

Current limitation :- 48 mA

Non-load voltage :- 24 V DC

Response time :- 20 ms

Stripping length :- 7 mm

Screw thread :- M3

Conductor cross section rigid :- 0.2 mm² ... 2.5 mm²

Conductor cross section AWG :- 24….14

Tightening torque :- 0.5 Nm ... 0.6 Nm

Max. output voltage U_{o :-} 27.7 V

Max. output current I_{o :-}  101 mA

Max. output power P_{o :-} 697 mW

Ambient temperature (operation) :- -40 °C ... 60 °C (Any mounting position)

Ambient temperature (storage/transport) :- -40 °C ... 80 °C

Permissible humidity (operation) :- 10 % ... 95 % (non-condensing)

Altitude :- ≤ 2000 m

Mounting type:- DIN rail mounting