Johnson Controls Metasys NCE Network Control MS-NCE2520-0 Rev. E Ver 4.0

·        Supports one LONWORKS trunk with up to 32 LONWORKS devices

·        Dedicated nominal 24 VAC, Class 2 power supply (North America),SELV power supply (Europe), at 50/60 Hz (20 VAC minimum to 30 VAC maximum)

·        Power Consumption:- 25 VA maximum for NCE25 only

·        Ambient Operating Conditions:-  0 to 50°C (32 to 122°F), 10 to 90% RH, 30°C (86°F) maximum dew point

·        Ambient Storage Conditions:-  -40 to 70°C (-40 to 158°F), 5 to 95% RH, 30°C (86°F) maximum dew point

·        Analog Input/Analog Output :- Analog Input Points: 16-bit resolution

·        Mounting :- On flat surface with screws on three mounting clips or a single 35 mm DIN rail

·        Power Source :- +15 VDC power source terminals provide 100 mA total current; quantity of inputs: five, located in Universal IN terminals; for active (3-wire) input devices

·        Supervisory Controller: 192 MHz Renesas SH4 7760 RISC processor

·        Field Controller: 20 MHz Renesas H8S2398 processor

·        Data Protection Battery :- Supports data protection on power failure. Rechargeable NiMH battery: 3.6 VDC 500 mAh, with a typical life of 5 to 7 years at 21°C (70°F); Product Code Number: MS-BAT1020-0

·        Analog Input/Analog Output :- Analog Input Points: 16-bit resolution

·        Operating System :- Microsoft Windows Embedded CE 6.0 (Release 9.0) Buildroot 2017.08.2 with Linux kernel 4.14 (Release 9.0.7 or later patch)

·        Input/Output Capabilities :- 10-Universal Inputs: Defined as 0–10 VDC, 4–20mA, 0–600k ohm, or Binary Dry Contact

• 8-Binary Inputs: Defined as Dry Contact Maintained or Pulse/Accumulator Mode
• 4-Analog Outputs: Defined as 0–10 VDC or 4–20mA
• 7-Binary Outputs: Defined as 24 VAC Triac (selectable internal or external source power)
• 4-Configurable Outputs: Defined as 0–10 VDC or 24 VAC Triac BO