GE Fanuc IC693MDL940H Output Relay 2A 16PT

The GE IC693MDL940H is a 16-point output module for the General Electric (GE) Fanuc Series 90-30 Programmable Logic Controllers (PLCs).

 It serves as the intermediary between the PLC and various devices, allowing the PLC to control them through electrical relays.

The IC693MDL940 operates in the voltage range of 5V to 30V DC supply.

At the frequency range of 50Hz to 60Hz, it operates in the voltage range of 5V to 250V.

 Also, the module uses 16 output points in four groups containing four output points in each group.

This module encounters the maximum load of 2A per output and 4A per common.

The minimum load encountered is 10mA. The top of the module IC693MDL940 hosts a LED indicator which indicates the status of output points.

The inside surface of the module provides the wiring information of the circuit. 

 Either of the DC or AC power supply operate the field devices.

This module does not use the fuses.

The response time for switching on/off is 15msec. In 90-30 series PLC system, the user can also use the IC693MDL940 in any of the slots of the baseplate.

Function:- Controls external devices through 16 individual relays

Number of output channels:- 16

Relay type:- Form C (SPDT - Single Pole, Double Throw)

Output voltage:- 120/240 volts AC

Frequency :- 50/60 Hz with AC

Output Current:- 2 Amps per circuit, 4 amps per common

Output Voltage Range:- 5 to 30 volts DC, 5 to 250 volts AC