GE Fanuc IC693MDL753G Output 12/24vdc 0.5A 32PT POS

The GE Fanuc IC693MDL753 is 12/24 volt DC, 0.5A Positive Logic Output module. 

Designed for the Series 90-30 Programmable Logic Controller, this output module is equipped with 32 discrete outputs.

These outputs have been set up in four separate isolated groups of eight. Each group has its own dedicated common. 

As they are sourcing type outputs, they switch the loads on the positive side of the power supply to supply current to the load.

The outputs on this module are capable of switching loads from +12 through +24 VDC (+20%, –15%).

They can also source current to a maximum value of 0.5 amps per point. In the group commons, there are user I/O connectors. 

Each connector has two pins, which can handle up to 3A current.

Rated Voltage:- 12 through 24 volts DC, positive logic

Output Voltage Range :- 10.2 to 28.8 volts DC

Outputs per Module :- 32 (four groups of eight outputs each)

Isolation :- 1500 volts between field side and logic side 250 volts between groups

Output Current :- 0.5 amps per point with 4 amps maximum per group and 3 amps maximum per group common pin

Inrush Current :- 5.4 amps for 10 ms

On-state Voltage Drop :- 0.3 volts DC

Off-state Leakage Current :- 0.1 mA maximum

On Response Time :- 0.5 ms maximum

Off Response Time :- 0.5 ms maximum

Internal Power Consumption :- 260 mA (maximum) from 5 volt bus on backplane; (13 mA + 3 mA/point ON + 4.7 mA/LED)

 16.5 mA (maximum) per group from user supply @ 24 VDC and all eight outputs in group ON 9.6 mA (maximum) per group from user supply @ 12 VDC and all eight outputs in group ON