GE Fanuc IC693MDL645G Input Module 24vdc 16PT POS/NEG Logic

The IC693MDL645 is a 24-volt DC Positive/Negative Logic Input belonging to the 90-30 Series of Programmable Logic Controllers. 

 It can be installed in any Series 90-30 PLC system that has either a 5 or 10 -slot baseplate.  This input module has both positive and negative logic characteristics. It has 16 input points per group.

It utilizes one common power terminal. The user has two options for powering field devices; either supply the power directly or use a compatible +24BDC supply.

This 24-volt DC Positive/Negative Logic Input module has a rated voltage of 24 volts with a DC input voltage range of 0 to +30 volts DC.  Isolation is 1500 volts between field side and logic side. 

The input current at rated voltage is typically 7 mA.  For its input characteristics: the on-state voltage is 11.5 to 30 volts DC while the off-state voltage is 0 to ±5 volts DC. 

 The on-state current is 3.2 mA minimum and the off-state current is 1.1 mA maximum. 

On and off response time is typically 7 ms for each. 

 Power consumption at 5V is 80 mA (when all inputs are on) from a 5-volt bus on the backplane. 

 Power consumption at 24V is 125 mA from the isolated 24-volt backplane bus or from user-supplied power.

Rated Voltage:- 24 Volts DC

No. of Inputs :- 16

Input Current :- 7.0 mA

Input Voltage Range :- 0 to -30 volts DC