GE Fanuc IC693CPU374-GS CPU With 240K User MEM W/Ethernet Comm

The GE Fanuc IC693CPU374 is a Series 90-30 Processor module.

This module is a CPU 374 module with single slot width, processor speed of 133 MHz with typical scan rate of 0.15 ms per 1K of logic for Boolean contacts.

It has an embedded user memory of 240KB with Two (2) Ethernet communication ports.

This module is operated within the ambient temperature range of 0°C to 60°C. The temperature required for the storage is in between -40° C and +85°C.

The total user memory used by the IC693CPU374 is 240 KB. The actual size associated with program memory for the user primarily depends on the configured memory types, such as Register memory (%R), Analog input (%AI) and Analog output (%AO). The amount of memory configured for each of these memory types is 128 to around 32,640 words.

The power required for the IC693CPU374 is 7.4 watts from 5V DC voltage. It also supports a RS-485 port when the power is supplied. The protocol SNP and SNPX are supported by this module when the power is supplied through this port.

Processor Speed :- 133 MHZ

Execution Time (Boolean Operation) :- 0.15 msec per Boolean instruction

Product Type :- Single-slot CPU with Ethernet controller

User Memory (total) :- 240KB (245,760) Bytes

Speed :- 10/100 Mbps

Temperature:- 0-60 degrees Celsius

Power Rating :- 7.4 Watts

System Registers :- 28

Voltage :- 5 Volts DC