Ge Fanuc IC693CPU331-AA CPU Module

The IC693CPU331 is a modular CPU, which includes the CPU, a memory chip, an integrated associated circuit chip which is soldered to a circuit board, and the backplane board.

The CPU module is inserted into the backplane, which is possible because the IC693CPU331 is a plug-in module.

The user must always install the CPU module into slot 1 of the baseplate. Remote baseplate and expansion are features that Modular CPU supports.

This CPU model has a scan rate per 1 K of logic, or we can say the Boolean contacts is typically 0.4 milliseconds.

 There is a maximum of 16K bytes of program memory available for the user. There are also 128 bits reserved for references to the System Status.

A single system can support up to 5 baseplates, which include one baseplate for the CPU and four remote and expansion baseplates.

This CPU requires a 350-milliamp load from the power supply, which should have a rate of +5V DC. With a processor speed of 10 Megahertz, the IC693CPU331 utilizes an 80188 processor. The ambient operating temperature ranges from 0°C to 60°C or 32°F to 140°F.

Product Type :- CPU module

Product Description :- Modular CPU

User memory :- 16 Kbytes

Processor type :- 80188

Compatibility :- GE Fanuc 90-30 PLCs

Clock speed :- 10 Megahertz

Typical scan rate :- 0.4 ms per 1K of Boolean logic

Processor speeds:- 10 MHZ

Discrete inputs :- 512

No. of extension baseplates :- Four (4) expansion baseplate; Four (4) Remote I/O baseplate

Discrete outputs :- 512

Discrete Input Points - %I :- 512

Operating temperature :- 32 to 140 degrees Fahrenheit

Analog Inputs - %AI :- 128 Word

Analog Outputs - %AQ :- 64 Words

Built-in Serial Ports :- 1 (uses connector on PLC power supply). Supports SNP slave and SNP-X slave protocols

Timers / Counters :- 680

Current load :- 350 mA

Bus voltage:- +5 VDC