GE Fanuc IC693ALG442 Input/Output Analog Curr/Voltage IC693ALG442-EB

The GE Fanuc IC693ALG442 is an analog I/O module of GE Fanuc series 90-30 PLC systems. It has four input and two output channels.

Power supply for this module is the typical +5VDC supply from the CPU with a maximum 95mA current and an external supply combined.

The external power supply for this module has a typical value of 24 VDC but can vary from 20 to 30 VDC. Warning: Connecting this module to a baseplate while power is on is dangerous and may damage the components of the system.

This module must be installed in a metal enclosure with external wiring. 

Number of Output Channels :- 2, Single-Ended

Update Rate :- 4 milliseconds

Output Current Ranges :- 0 to 20 mA or 4 to 20 mA

Resolution 0 to 20 mA :- 0.625 µ A (1 LSB = 0.625 µ A)

Resolution 4 to 20 mA :- 0.5µ A (1 LSB = 0.5 µ A) 

Absolute Accuracy1 All Current Modes :-  0.1% of full scale @25˚C (77˚F), Typical

 0.25% of full scale @ 25C (77F), (maximum)

 0.5 % of full scale Over Operating Temperature range (Maximum)

Maximum Compliance Voltage :- VUSER –3V (minimum) to VUSER (maximum)

User Load :- 0 to 850 Ω %(minimum) at VUSER =20V, maximum 1350 Ω%at VUSER =30V

Output Load Capacitance :- 2000 pF (maximum)

Output Load Inductance :- 1 H (maximum)

Output Ranges :- -10 to +10V (bipolar) , 0 to +10V (unipolar)

Resolution -10 to +10V :- 0.3125 mV (1 LSB = 0.3125 mV)

Resolution 0 to +10V :- 0.3125 mV (1 LSB = 0.3125 mV)

Update Rate:- 4 msec (all channels)

Max Output Load: :- 5 mA

Power Consumption :- 95 mA from +5 V bus or 129 mA from +24 V  user supply