Carel UPCA001BM0 Board Controller

       ·        fi tted on DIN rail according to DIN 43880 and CEI EN 50022 standards

·         material:-technopolymer

·        fl ame retardancy:- V2 (UL94) and 850 °C (IEC 695).

·        ball pressure test:- 125 °C

·        resistance to creeping current:-  ≥250 V

·        power supply (controller with terminal connected) :-  230 Vac, +10...-15% for UPCA , 24 Vac +10 to -15% 50/60 Hz, 28 to 36 Vdc +10 to -20% for UPCB

·        Maximum power input:- 25 VA

·        Insulation between power line and controller :-  double

·        terminal block :- with plug-in male/female connectors, max voltage 250 Vac; cable cross-section:- min. 0.5 mm2 - max 2.5 mm2

·        Max tightening torque: - 0,4 Nm

·        parameter data memory :-  13 kB at 8 bits (max. limit: 400,000 writes per memory location)

·        Battery type :-  Lithium button battery, code CR2430, voltage 3 Vdc (size 24x3 mm)