Carel FLOE000010 Flood Detector

 ·        The FLOS flood detector is A DIN mounted electronic device when installed with sensor probes is designed to detect the presence of water and consequently signal the alarm. The device is typically installed inside the electrical panel, while the probe or probes should be located in the zone being controlled.

·        Power supply: 24 Vac (±10%) ~ 50/60 Hz

·        Maximum power input: 1.5 VA

·        Operating conditions: -10T60 °C, 95% rH non-cond.

·        Alarm relay output circuit: 250 Vac 2 A resistive, 2 A inductive,

·        cosj= 0.4, 2 (2) A, according to EN60730-1 (100,000 cycles)

·        Maximum length of the probe connection cable: 500 m, with single wire cable and double insulation

·        Cross-section of the connection cable: 1.5 mm2

·        Standards compliance: CE EN 6000-6-2,

·        EN 6000-6-4 (EMC), EN 61010-1 (safety)

·        Dimensions: 2 DIN modules

·        Index of protection: IP40