ABB OD4165 Electricity Meter 2CMA131024R1000

·        Data from ODINsingle is collected via pulse output or serial communication.

·         The pulse output generates pulses proportionally to the measured energy.

·        ODIN comes with an infrared port for communication with an external Serial Communication Adapter (SCA).

·        There are SCAs for M-Bus, RS-232, Ethernet, GSM/GPRS and KNX

·        ODINsingle is a meter that is very easy to handle.

·        It is easy to read the large LCD display with 6 mm high digits and symbols for load indication and communication.

·         The meter has a LED on the front that flashes proportionally to the measured energy.

·        The energy consumption of the meter is low, less than 1.0 VA.

·        Voltage range :- -20% to +15%

·        Max current :- 65 A

·        Start current :- 25 mA

·        Power consumption of current circuits :- < 3 VA/phase

·         Frequency :- 50/60 Hz

·        Voltage:- 3x230/400 V AC

·        Temperature range Operating :-  -25 to +55˚C

·        Temperature range Storage -25 to +70˚C

·        Protection against:- IP20

·        Connection area in the connecting terminal:-  0.5 – 2.5 mm2

·        External pulse voltage:-  5 – 40 V DC

·        Max. current:-  100 mA

·        Pulse frequency :- 100 imp/kWh

·        Display :- LCD with 7 digits without a decimal place, 6 mm

·        Single phase

·         Direct connected up to 65 A

·        Backlit LCD with 6 digits (6 mm digits)

·         Low power consumption

·         Resettable counter

·        2 DIN modules width