ABB DO810 3BSE008510R1 PR:G Wh base TU810V1 3BSE013230R1 PR: G

·       ABB DO810 3BSE008510R1:-

·        This module has 16 digital outputs. The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A.

·        The outputs are protected against short circuits, over voltage and over temperature.

·        The outputs are divided into two individually isolated groups with eight output channels and one voltage supervision input in each group.

·         Each output channel consists of a short circuit and over temperature

·        Isolated in two groups of 8 channels.
0.5A, Short circuit proof.
Use Module Termination Unit TU810, TU812, TU814, TU830, TU833.

·        Number of Output Channels:-16

·        Signal specification:- 24V d.c. (12 - 32 V d.c.), 0.5 A

·        Isolation:- Groupwise isolated from ground

·        Output load:- < 0.4 Ω

·        Current limiting:- Short circuit proof current limited output

·        Maximum field cable length:- 600 meters (656 yards)

·        Rated insulation voltage:- 50 V

·        Dielectric test voltage:- 500 V a.c

·        Current consumption +5 V Modulebus :- 80 mA

·        Power dissipation :- Typ. 2.1W

·        16 channels for 24 V d.c. current sourcing outputs

·        2 isolated groups of 8 channels with process voltage supervision

·        Output status indicators

·        OSP sets outputs to predetermined state upon error detection

·        Short-circuit protection to ground and 30 V

·        Over-voltage and over-temperature protection

·       TU810V1 3BSE013230R1:-

·        The TU810 is a 16 channel compact module termination unit. The TU810 has three rows of terminals for field signals and process power connections.

·        The TU811 is a 8 channel compact module termination unit. The TU811 has three rows of terminals for field signals and process power connection.

·        The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O.

·        The MTU is a passive unit used for connection of the field wiring to the I/O modules.

·        It also contains a part of the ModuleBus. The TU810/TU810V1 MTU can have up to 16 I/O channels and two process voltage connections.

·        The maximum rated voltage is 50 V and maximum rated current is 2A per channel.

·        Two mechanical keys are used to configure the MTU for different types of I/O modules.

·        The MTU distributes the ModuleBus to the I/O module and to the next MTU.

·         It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU. 

·        Compact Module Termination Unit 2x8 signal terminals.

·        TU810V1 Compact Module Termination Unit

·        MTU, 50V. 2x8 signal terminals, rated isol. 50V.

·        Channels :- 16

·        Voltage :- 50V

·        Mounting detail Horizontal :-  55 ºC (131 °F) , Vertical 40 ºC (104 °F)

·        Process connections :- 2 x 2 Process power, 5 x 2 Process power (0 V)