ABB DO801, ABB CI801, ABB AI801

·        AI801:- The AI801 Analog Input Module has 8 channels for current input. The current input is able to handle a short circuit to the transmitter supply at least 30 V d.c without damage.

·        Current limiting is performed with a PTC resistor. The input resistance of the current input is 250 ohm, PTC included.

·        8 channels for 0...20 mA, 4...20 mA d.c., single ended unipolar inputs

·        1 group of 8 channels isolated from ground

·        12 Bit resolution

·        Input shunt resistors protected to 30 V by PTC resistor

·        Analog inputs are short circuit secured to ZP or +24 V

·        The input withstand HART communication

·        Process and power connections via detachable connectors

·        Signal specification:- 0...20 mA, 4...20 mA

·        Number of channels:- 8

·        Resolution :- 12 bit

·        Input impedance:- 230 - 275 kΩ (current input incl PTC)

·        Under/over range:- 0% / +15%

·        Temperature drift:- Typ. 50 ppm/°C, Max. 80 ppm/°C

·        Maximum field cable length:- 600 meters (656 yards)

·        Max input voltage (non destructive):- 30 V dc

·        NMRR, 50Hz, 60Hz:- >40dB

·        Rated insulation voltage :- 50 V

·        Power dissipation:- 1.1 W

·        Current consumption +5 V Modulebus :- 70 mA

·        Dielectric test voltage:- 500 V ac

·        Temperature Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity:- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C (104 °F)

·        Protection class :- IP20

·        CI801 :- S800 I/O is a comprehensive, distributed and modular process I/O system that communicates with parent controllers and PLCs over industry-standard field buses. 

·        The CI801 Fieldbus Communication Interface (FCI) module is a configurable communication interface that performs operations such as signal processing, gathering of supervision information, OSP handling, Hot Configuration InRun, HART pass-trough and configuration of I/O modules. 

·        24 V consumption typ. :- 140 mA

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity:- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C (104 °F)

·        Protection class :- IP20

·        DO801:- The DO801 is a 16 channel 24 V digital output module for the S800 I/O.

·        The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A.

·        The outputs are protected against short circuits, over voltage and over temperature.

·        The outputs are in one isolated group. Each output channel consists of a short circuit and over temperature protected high side driver, EMC protection components, inductive load suppression, output state indication LED and optical isolation barrier.

·        Signal specification:- 24 V d.c. (12 - 32 V d.c.), 0.5 A

·        Number of channels :- 16

·        Isolation :- Groupwise isolated from ground

·        Output load :- < 0.4 Ω

·        Maximum field cable length:- 600 meters (656 yards)

·        Rated insulation voltage :- 50 V

·        Dielectric test voltage :- 500 V ac

·        Power dissipation:- Typ.2.1 W

·        Current consumption +5 V Modulebus :- 80 mA

·        Supported wire size :- Solid: 0.05-2.5 mm², 30-12 AWG
Stranded: 0.05-1.5 mm², 30-12 AWG
Recommended torque: 0.5-0.6 Nm
Stripping length 6-7.5mm, 0.24-0.30 inch

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C (104 °F)

·        Protection class :- IP20