ABB DI810 16ch 24V Input Module 3BSE008508R1 PR:G ABB 3BSE013230R1 PR:G

·       3BSE008508R1 :-

·        This module has 16 digital inputs. The input voltage range is 18 to 30 volt d.c. and the input current is 6 mA at 24 V.

·        The inputs are divided into two individually isolated groups with eight channels and one voltage supervision input in each group.

·        Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation barrier.

·        The process voltage supervision input give channel error signals if the voltage disappears. The error signal can be read via the ModuleBus.

·        16 channels for 24 V d.c. inputs with current sinking

·        Two isolated groups of 8 with voltage supervision

·        Input status indicators

·        Signal specification:- 24 V d.c.

·        Number of channels :- 16

·        Input voltage range, "0" :- -30..+5 V

·        Input voltage range, "1" :- 15..30 V

·        Input impedance :- 3.5 kΩ

·        Isolation:-  Groupwise isolated from ground, 2 groups with 8 channels

·        Filter times (digital, selectable) :- 2, 4, 8, 16 ms

·        Current limiting :- Sensor power can be current limited by the MTU

·        Maximum field cable length :- 600 meters (656 yards)

·        Rated insulation voltage :- 50 V

·        Dielectric test voltage :- 500 V a.c.

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)

·        Protection class :- IP20

·       ABB 3BSE013230R1 :-

·        The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O.

·        The MTU is a passive unit used for connection of the field wiring to the I/O modules.

·        It also contains a part of the ModuleBus.

·        The MTU distributes the ModuleBus to the I/O module and to the next MTU.

·        It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU.

·        Two mechanical keys are used to configure the MTU for different types of I/O modules.

·        This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations.

·        Compact Module Termination Unit 2x8 signal terminals.

·        TU810V1 Compact MTU, 50V

·        Channels :- 16

·        Voltage :- 50 V

·        Mounting detail :- Horizontal 55 ºC (131 °F)
Vertical 40 ºC (104 °F)

·        Process connections :- 2 x 2 Process power, 5 x 2 Process power (0 V)

·        Dielectric test voltage :- 500 V ac

·        Acceptable wire sizes :- Solid: 0.2 - 4 mm² Stranded: 0.2 - 2.5 mm², 24 - 12 AWG

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to + 70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C (104 °F)

·        Protection class :- IP20