ABB AO810V2 8ch 0..20mA 3BSE038415R1 PR:D With 3BSE013230R1 PR:G

·       ABB AO810V2 8ch 0..20mA 3BSE038415R1 :-

·        0(4)..20mA, 14bit RLmax 500/850 Ohms.
Use module Termination Unit TU810, TU812, TU814, TU830 or TU833.

·        The AO810/AO810V2 Analog Output Module has 8 unipolar analog output channels.

·        To supervise the communication to the D/A-converters the serial data is read back and verified.

·        The opencircuit diagnostic is received during the readback.

·        The module performs self-diagnostic cyclically.

·        The module diagnostics includes process power supply supervision, which is reported when supply voltage to output circuitry is to low.

·         The error is reported as a channel error.

·        The channel diagnostic includes fault detection of the channel (only reported on active channels).

·        The error is reported if the output current is less than the output set value and the output set value is greater than 1 mA.

·        Signal specification :- 0..20 mA, 4..20 mA

·        Under/over range :- - / +15%

·        Output load :- ≤ 500 Ω (supply connected to L1+ only)
250 - 850 Ω (with supply connected L2+ only)

·        Temperature drift :- Typ. 30 ppm/°C, Max 60 ppm/°C

·        Update cycle time :- ≤ 2ms

·        Rated insulation voltage :- 50 V

·        Dielectric test voltage :- 500 V a.c.

·        Maximum field cable length :- 600 meters (656 yards)

·        Power dissipation :- 2.3 W

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)

·        Protection class :- IP20

·        3BSE013230R1:-

·        Compact Module Termination Unit 2x8 signal terminals.