s
Supplier Of Industrial and Marine Equipments
· ABB AI830 RTD 3BSE008518R1:-
· The AI830/AI830A RTD Input Module has 8 channels for measurement of temperature with resistive elements (RTDs).
· With 3-wire connections.
· All the RTDs must be isolated from ground.
· The AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or resistive sensors.
· Linearization and conversion of the temperature to Centigrade or Fahrenheit is performed on the module.
· Every channel can be individually configured.
· The MainsFreq parameter is used to set mains frequency filter cycle time. This will give a notch filter at the frequency specified (50 Hz or 60 Hz).
· ABB AI830 3BSE008518R1 AI830 Analog Input - RTD Pt100, Ni100/120, Cu10, R.
· 3-wire RTD: Pt100, Cu10, NI100, Ni120 and resistive potentiometer
· Number of channels :- 8
· 14 Bit resolution
· Isolation :- Groupwise isolated from ground
· CMRR, 50Hz, 60Hz :- >120 dB (at 10Ω load)
· NMRR, 50Hz, 60Hz :- >60 dB
· Rated insulation voltage :- 50 V
· Dielectric test voltage :- 500 V ac
· Power dissipation :- 1.6 W
· Current consumption +5 V Modulebus :- 70 mA
· Current consumption +24 V Modulebus :- 50 mA
· Supervision:- Open-circuit, short-circuit,
reference channel, internal power supply
· Electrical safety :- EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
· Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C
· Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)
· Relative humidity :- 5 to 95 %, non-condensing
· Max ambient temperature :- 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)
· Protection class :- IP20
· 3BSE013234R1:-
· Extended Module Termination Unit 2x16 signal terminals.
· Mounting detail:- 55 ºC (131 °F)
· Channel :- 16
· Voltage :- 50 V
· ABB AI830 RTD 3BSE008518R1:-
· The AI830/AI830A RTD Input Module has 8 channels for measurement of temperature with resistive elements (RTDs).
· With 3-wire connections.
· All the RTDs must be isolated from ground.
· The AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or resistive sensors.
· Linearization and conversion of the temperature to Centigrade or Fahrenheit is performed on the module.
· Every channel can be individually configured.
· The MainsFreq parameter is used to set mains frequency filter cycle time. This will give a notch filter at the frequency specified (50 Hz or 60 Hz).
· ABB AI830 3BSE008518R1 AI830 Analog Input - RTD Pt100, Ni100/120, Cu10, R.
· 3-wire RTD: Pt100, Cu10, NI100, Ni120 and resistive potentiometer
· Number of channels :- 8
· 14 Bit resolution
· Isolation :- Groupwise isolated from ground
· CMRR, 50Hz, 60Hz :- >120 dB (at 10Ω load)
· NMRR, 50Hz, 60Hz :- >60 dB
· Rated insulation voltage :- 50 V
· Dielectric test voltage :- 500 V ac
· Power dissipation :- 1.6 W
· Current consumption +5 V Modulebus :- 70 mA
· Current consumption +24 V Modulebus :- 50 mA
· Supervision:- Open-circuit, short-circuit,
reference channel, internal power supply
· Electrical safety :- EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
· Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C
· Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)
· Relative humidity :- 5 to 95 %, non-condensing
· Max ambient temperature :- 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)
· Protection class :- IP20
· 3BSE013234R1:-
· Extended Module Termination Unit 2x16 signal terminals.
· Mounting detail:- 55 ºC (131 °F)
· Channel :- 16
· Voltage :- 50 V