ABB AI810 Analog input Module 3BSE008516Z1 PR:X With 3BSE013230R1 PR:G

·       3BSE008516Z1:-

·        The AI810 Analog Input Module has 8 channels. Each channel can be either a voltage or current input.

·        The current input is able to handle a short circuit to the transmitter supply at least 30 V d.c without damage.

·        Current limiting is performed with a PTC resistor. The input resistance of the current input is 250 ohm, PTC included.

·        The voltage input is able to withstand an over or undervoltage of at least 30 V d.c.

·        8 channels for 0...20 mA, 4...20 mA, 0...10 V or 2...10 V d.c., single ended unipolar inputs

·        1 group of 8 channels isolated from ground

·        12 Bit resolution

·        Input shunt resistors protected to 30 V by PTC resistor

·        Analog inputs are short circuit secured to ZP or +24 V

·        The input withstand HART communication.

·         Input resistance is 290k ohm. Transmitter supply can be connected to L1+, L1- and/or L2+, L2-.

·        0(4)..20mA, 0..10V, 12Bit, single ended.
Use Module Termination Unit TU810, TU812, TU814, TU818, TU830, TU833, TU835, TU838, TU850.

·        Input impedance :- 290 kΩ (voltage input) 230 - 275 kΩ (current input)

·        Isolation :- Groupwise isolated from ground

·        Under/over range :- -5% / +15%

·        Resolution :- 12 bit

·        Temperature drift :- Voltage: Typ. 70 ppm/°C Max. 100 ppm/°C; Current: Typ. 50 ppm/°C Max. 80 ppm/°C

·        Maximum field cable length:- 600 meters (656 yards)

·        Max input voltage (non destructive) :- 30 V dc

·        NMRR, 50Hz, 60Hz :- > 40dB

·        Rated insulation voltage :- 50 V

·        Dielectric test voltage :- 500 V ac

·        Power dissipation :- 1.5 W

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)

·        Protection class :- IP20

·       ABB 3BSE013230R1 :-

·        The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O.

·        The MTU is a passive unit used for connection of the field wiring to the I/O modules.

·        It also contains a part of the ModuleBus.

·        The MTU distributes the ModuleBus to the I/O module and to the next MTU.

·        It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU.

·        Two mechanical keys are used to configure the MTU for different types of I/O modules.

·        This is only a mechanical configuration and it does not affect the functionality of the MTU or the I/O module. Each key has six positions, which gives a total number of 36 different configurations.

·        Compact Module Termination Unit 2x8 signal terminals.

·        TU810V1 Compact MTU, 50V

·        Channels :- 16

·        Voltage :- 50 V

·        Mounting detail :- Horizontal 55 ºC (131 °F)
Vertical 40 ºC (104 °F)

·        Process connections :- 2 x 2 Process power, 5 x 2 Process power (0 V)

·        Dielectric test voltage :- 500 V ac

·        Acceptable wire sizes :- Solid: 0.2 - 4 mm² Stranded: 0.2 - 2.5 mm², 24 - 12 AWG

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to + 70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C (104 °F)

·        Protection class :- IP20