ABB AI810 3BSE008516R1 PR:Z With Base 3BSE013230R1 PR:G

·       ABB AI810 3BSE008516R1 :-

·        The AI810 Analog Input Module has 8 channels. Each channel can be either a voltage or current input.

·        The current input is able to handle a short circuit to the transmitter supply at least 30 V d.c without damage.

·        Current limiting is performed with a PTC resistor.

·        The input resistance of the current input is 250 ohm, PTC included.

·        The voltage input is able to withstand an over or undervoltage of at least 30 V d.c. Input resistance is 290k ohm.

·        Transmitter supply can be connected to L1+, L1- and/or L2+, L2-.

·        Signal specification:- 0..20mA, 4..20mA, 0..10V, 2..10V

·        Number of channels :- 8

·        Resolution :- 12 bit

·        Input impedance:- 290 kΩ (voltage input), 230 - 275 kΩ (current input)

·        Under/over range :- -5% / +15%

·        Temperature drift :- Voltage: Typ. 70 ppm/°C Max. 100 ppm/°C; Current: Typ. 50 ppm/°C Max. 80 ppm/°C

·        Maximum field cable length :- 600 meters (656 yards)

·        Max input voltage (non destructive):- 30 V dc

·        Power dissipation :- 1.5 W

·        Rated insulation voltage :- 50 V

·        Current consumption +24 V Modulebus :- 40 mA

·        Current consumption +5 V Modulebus :- 70 mA

·        Temperature, Operating:- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)

·        Protection class :- IP20

·       3BSE013230R1 :-

·        The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus.

·        Compact Module Termination Unit 2x8 signal terminals.

·        Ambient Temp: 55°C

·        Channels:- 16

·        Voltage :- 50 V

·        Mounting detail :- Horizontal 55 ºC (131 °F)
Vertical 40 ºC (104 °F)

·        Use with I/O :- AI810, AI815, AI820, AI830, AI830A, AI835, AI835A, AI845, AO810, AO810V2, AO815, AO820, AO845, AO845A, DI810, DI811, DI814, DI830, DI831, DI840, DI880, DI885, DO810, DO814, DO815, DO840, DO880, DP820, DP840

·        Process connections :- 2 x 2 Process power, 5 x 2 Process power (0 V)

·        Maximum current per I/O channel :- 2A

·        Maximum current process connection :- 5 A

·        Acceptable wire sizes:- Solid: 0.2 - 4 mm² Stranded: 0.2 - 2.5 mm², 24 - 12 AWG

·        Dielectric test voltage :- 500 V ac

·        Electrical safety :- EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201

·        Temperature, Operating :- 0 to +55 °C (+32 to +131 °F), appro vals are issued for +5 to +55 °C

·        Temperature, Storage:- -40 to + 70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Max ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C (104 °F)

·        Protection class :- IP20