ABB AC800M PM860 3BSE018100R1 PR:K Processor Unit PM860K01

·        Package including: -PM860, CPU -TP830, Baseplate, width=115 mm -TB850, CEX-bus

·        terminator -TB807, ModuleBus terminator -Battery for memory backup ( 4943013-6 )

·        The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface.

·        The base plate of the PM860A controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4).

·         One of the serial ports (COM3) is an RS-232C port with modem control signals, whereas the other port (COM4) is isolated and used for the connection of a configuration tool.

·        Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism.

·        All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity.

·        The address can be found on the Ethernet address label attached to the TP830 base plate.

·        Clock Frequency :- 48 MHz

·        Performance, 1000 boolean operations :- 0.23 ms

·        Memory :- 16 MB (from 800xA 5.1 FP4)

·        RAM available for application :- 10.346 (from 800xA 5.1 FP4)

·        No. of programs per application :- 64

·        No. of applications per controller :- 32

·        No. of diagrams per application :- 128

·        Flash PROM for firmware storage :- 2 MB

·        Power supply :- 24 V DC (19.2-30 V DC)

·        Power consumption +24 V typ/max :- 180 / 300 mA

·        Power dissipation :- 4.32 W (7.2 W max)

·        Built-in back-up battery :- Lithium, 3.6 V

·        AC 800M transm. speed to OPC server :- 36-86 events/sec ,113-143 data messages/sec

·        Supply current on CEX bus :- Max 2.4 A

·        I/O capacity on Modulebus :- Max 96 I/O modules

·        Modulebus scan rate :- 0 - 100 ms (actual time depending on number of I/O modules)

·        Supply current on:-  24 V : max 1.0 A

·        Electrical Modulebus :- 5 V : max 1.5 A

·        Recommended Control Network backbone :- 100 Mbit/s switched Ethernet

·        RS-232C interface (COM3) (non red. only):- RS-232C, 75-19 200 baud, RJ-45 female (8-pole), not opto isolated, full RTS-CTS support

·        Temperature, Operating :- +5 to +55 °C (+41 to +131 °F)

·        Temperature, Storage :- -40 to +70 °C (-40 to +158 °F)

·        Relative humidity :- 5 to 95 %, non-condensing

·        Rated Isolation Voltage :- 500 V ac

·        Dielectric test voltage :- 50 V

·        Protection class :- IP20

·        Electrical Safety :- EN 50178, IEC 61131-2, UL 61010-1, UL 61010-2-201